-
- News
- Books
Featured Books
- pcb007 Magazine
Latest Issues
Current IssueThe Growing Industry
In this issue of PCB007 Magazine, we talk with leading economic experts, advocacy specialists in Washington, D.C., and PCB company leadership to get a well-rounded picture of what’s happening in the industry today. Don’t miss it.
The Sustainability Issue
Sustainability is one of the most widely used terms in business today, especially for electronics and manufacturing but what does it mean to you? We explore the environmental, business, and economic impacts.
The Fabricator’s Guide to IPC APEX EXPO
This issue previews many of the important events taking place at this year's show and highlights some changes and opportunities. So, buckle up. We are counting down to IPC APEX EXPO 2024.
- Articles
- Columns
Search Console
- Links
- Events
||| MENU - pcb007 Magazine
Process Engineering & Defect Prevention
October 6, 2017 | Michael Carano, RBP Chemical TechnologyEstimated reading time: 1 minute
As of this writing, I have explored many topics related to specific defects that plague printed circuit board fabricators. A key underlying theme of these writings underscores the critical need of the skilled troubleshooter to get to the underlying cause or causes of the defects. Defects may “manifest” or be detected in or after a specific operation within the printed circuit board manufacturing process, but the underlying root cause may have occurred earlier (perhaps much earlier) in the process. As I have written in prior columns, I chose to present the anomaly or defect where it is most likely to be detected, then subsequently presented the most likely root causes wherever they might have been introduced. It should be noted that these examples are presented as likely starting places for the investigation of anomalies or defects presented, or the kinds of causes that might be investigated.
The troubleshooter’s task is complicated by the fact that there are many possible ways to combine or sequence the individual process steps available to achieve the desired end structure. As an example, a simple, single-lamination multilayer printed wiring board may involve 30 to 50 process steps, while a complex, multiple lamination (sequential lamination) printed wiring board, with pre- and post-machining and other mechanical operations, and selective plating processes, could involve several hundred process steps. In an ideal world, each step could be verified correct immediately during or after the process, but in practice the effect of many processes cannot be readily evaluated until the completion of many subsequent steps make latent errors visible. Much effort is and has been expended in attempts to improve this, with limited success. Thus, it remains a troublesome issue. The concern then is the defect may not manifest itself until several downstream process steps. One may refer to this as the latent defect. The impact of these latent defects is four-fold:
1. First, the detection and verification of the defect may require real time and the diversion of skilled resources—already in short supply in most lean-running modern operations.
2. Second, there is a schedule impact in today’s just-in-time operating mode, both of the process flow disruption inherent in the detection and in the verification of the defect.
To read the full version of this article which appeared in the October 2017 issue of The PCB Magazine, click here.
Suggested Items
KYZEN to Promote Pair of Stencil Cleaning Chemistries at SMTA Ciudad Jaurez Expo & Tech Forum
04/25/2024 | KYZEN'KYZEN, the global leader in innovative environmentally friendly cleaning chemistries, will exhibit at the SMTA Ciudad Juarez Expo & Tech Forum, scheduled to take place Thursday, May 9, 2024 at the Injectronic Convention Center in Ciudad Jaurez, Chihuahua, Mexico. During the event the KYZEN Clean Team will focus on understencil cleaning products KYZEN E5631J and CYBERSOLV C8882.
Cadence, TSMC Collaborate on Wide-Ranging Innovations to Transform System and Semiconductor Design
04/25/2024 | Cadence Design SystemsCadence Design Systems, Inc. and TSMC have extended their longstanding collaboration by announcing a broad range of innovative technology advancements to accelerate design, including developments ranging from 3D-IC and advanced process nodes to design IP and photonics.
Listen Up! The Intricacies of PCB Drilling Detailed in New Podcast Episode
04/25/2024 | I-Connect007In episode 5 of the podcast series, On the Line With: Designing for Reality, Nolan Johnson and Matt Stevenson continue down the manufacturing process, this time focusing on the post-lamination drilling process for PCBs. Matt and Nolan delve into the intricacies of the PCB drilling process, highlighting the importance of hole quality, drill parameters, and design optimization to ensure smooth manufacturing. The conversation covers topics such as drill bit sizes, aspect ratios, vias, challenges in drilling, and ways to enhance efficiency in the drilling department.
Designer’s Notebook: What Designers Need to Know About Manufacturing, Part 2
04/24/2024 | Vern Solberg -- Column: Designer's NotebookThe printed circuit board (PCB) is the primary base element for providing the interconnect platform for mounting and electrically joining electronic components. When assessing PCB design complexity, first consider the component area and board area ratio. If the surface area for the component interface is restricted, it may justify adopting multilayer or multilayer sequential buildup (SBU) PCB fabrication to enable a more efficient sub-surface circuit interconnect.
Real Time with... IPC APEX EXPO 2024: Advancements in Laser Depaneling with LPKF
04/24/2024 | Real Time with...IPC APEX EXPOJake Benz, LPKF sales manager for North America, discusses the company's advancements in laser depaneling. LPKF has introduced a green wavelength laser for processing rigid FR-4 circuit boards, bringing significant gains in processing speeds to market. The company transitioned from IR CO2 to UV wavelength due to heat and burning issues.