Show & Tell: IPC APEX EXPO 2018 is on the Books!


Reading time ( words)

I am home from another IPC APEX EXPO. I have been going to these things for more than 38 years, and I learn something each year.

I spent most of Monday attending the Design Forum, which is a set of classes specifically targeted at PCB designers. Up first was Dana Korf, an old hand at tooling and front-end engineering. He presented “Printed Circuit Board Factory 4.0,” a comprehensive program he and others are undertaking to develop a completely digital fabrication data package in a single .XML file, as outlined in Figure 1. The unfortunate truth is that less than 10% of all new orders arrive at the PCB fabricator’s facility with complete, accurate design data; most have missing or incorrect data. Another big issue is that a lot of the preliminary or front-end information is in the form of drawings and specifications that require reading and interpreting, and sometimes even further investigation, as it is often conflicting data. Dana wants all this data to be digital to drive a modern Industry 4.0 factory.

Dana went over the progress since the 1970s culminating in the current IPC-2581 standard, and additional software added to cover what the OEM is sending and what the factory needs. 

The digital modernization covered information for the BOM (ECAD and MCAD), mechanical fabrication, stackup, material requirements, impedance requirements, plating and surface finish, artwork, drawings, notes and requirements for acceptability. This information can support the requirements of the enterprise business system PLM/ERP. 

To read the full version of this article which originally appeared in the Show & Tell Magazine, click here.

Share


Suggested Items

Jan Pedersen: CircuitData Enhances Current Data Formats

04/11/2018 | I-Connect007 Editorial Team
During the Design Forum at IPC APEX EXPO 2018, Jan Pedersen, senior technical advisor for the PCB broker Elmatica, gave a presentation on CircuitData. The language is designed to help facilitate other design data transfer formats such as Gerber, ODB++, and IPC-2581. Jan spoke with Managing Editor Andy Shaughnessy and Contributing Technical Editor Happy Holden about how this open language works with the existing data formats, as well as the need to eliminate paper documents from design process, and how the industry can help shape this open-source language.

Martin Cotton Discusses Ventec’s New Book and Low-Loss Materials

04/11/2018 | Andy Shaughnessy, Design007 Magazine
During DesignCon 2018, Andy Shaughnessy sat down for an interview with Martin Cotton, director of OEM projects for Ventec. Martin was a PCB designer for years, so he has experience on both sides of the desk. They discussed Ventec’s reasons for coming to DesignCon, their expansion into low-loss materials, and Ventec’s new I-Connect007 book, The Printed Circuit Designer’s Guide to Thermal Management with Insulated Metal Substrates.

IPC-2581 Demo Draws a Crowd at IPC APEX EXPO

03/21/2018 | Real Time with...IPC
During IPC APEX EXPO 2018, the IPC-2581 Consortium held a demo of this open-source data transfer standard, attracting numerous designers, fabricators and assembly providers. Jim Pierce of Axiom Electronics and Bob Miklosey of Aegis Software sat down to discuss the demo and their involvement with the consortium. Axiom now charges more for designs submitted in the Gerber format.



Copyright © 2018 I-Connect007. All rights reserved.