RTW IPC APEX EXPO 2019: LPKF Highlights Laser Processing Tech, Glass Drilling Capabilities


Reading time ( words)

Guest Editor Joe Fjelstad sits down with Stephan H. Schmidt, LPKF president, who provides an overview of the company's laser processing machine and their capabilities, and highlights the new glass drilling capabilities.

To watch the interview, click here.

Share

Print


Suggested Items

Vertical Conductive Structures, Part 3: Design Tool Techniques

08/23/2019 | Ed Hickey and Mike Catrambone, Cadence Design Systems, and Joan Tourné, Nextgin Technology
New vertical conductive structure (VeCS) technology can reduce layer count and improve signal integrity without the need for sequential technologies. VeCS is different than traditional through-hole vias, microvias, and ELIC designs, which are more expensive and require a high number of laminations, drilling, and plating cycles to build up a reasonable number of layers.

A Guide to High-reliability PCBs from Design to Specification

07/24/2019 | Jeff Beauchamp, NCAB Group
Creating reliable PCBs is an outcome of considering all aspects that can affect reliability as early as possible in the design process. The further down the design process, the more expensive and risky it can be to fix. As they say, everything starts with the design. Because a good board design improves the reliability of the end product and lessens the risk of failure.

Microvias: Links of Faith are Not Created Equally

07/18/2019 | Jerry Magera and J.R. Strickland, Motorola Solutions Inc.
Microvias connect adjacent copper layers to complete electrical paths. There are copper-filled microvias, which can be stacked to form connections beyond adjacent copper layers, and staggered microvias, which stitch adjacent copper layers with paths that meander on the layers between the microvias. This article discusses the various laser-drilled microvias and presents SEM photographs to begin the search for the root cause of weak copper interface.



Copyright © 2019 I-Connect007. All rights reserved.