-
- News
- Books
Featured Books
- pcb007 Magazine
Latest Issues
Current IssueThe Sustainability Issue
Sustainability is one of the most widely used terms in business today, especially for electronics and manufacturing but what does it mean to you? We explore the environmental, business, and economic impacts.
The Fabricator’s Guide to IPC APEX EXPO
This issue previews many of the important events taking place at this year's show and highlights some changes and opportunities. So, buckle up. We are counting down to IPC APEX EXPO 2024.
Getting to Know Your Designer
In this issue, we examine how fabs work with their design customers, educating them on the critical elements of fabrication needed to be successful, as well as the many tradeoffs involved. How well do you really know your customer? What makes for a closer, more synchronized working relationship?
- Articles
- Columns
Search Console
- Links
- Events
||| MENU - pcb007 Magazine
EIPC Winter Conference, Day 1
March 19, 2019 | Alun Morgan, EIPCEstimated reading time: 10 minutes
At the EIPC Winter Conference in Milan on February 14–15, as the EIPC Chairman, I opened the first day of the conference in the customary style by welcoming sponsors and guests. Noting that it was Valentine’s day as well as the 150th anniversary of Mendeleev’s periodic table, I made a special Valentine’s day version of the table complete with heart-shaped elements. I went on to explain that 2019 was the International Year of the Periodic Table of Chemical Elements to mark Mendeleev’s achievement in categorising the element in groups defined by their atomic mass and valency.
I further explained that Mendeleev’s insight allowed him to infer the existence of as yet undiscovered elements and even to predict their properties. Mendeleev had postulated that “ekaaluminium” must exist in the gap in his table immediately below aluminium; we now know this as gallium, and his forecasts of its properties were spot on. I produced some of the soft, silvery blue metal gallium, explaining that it has a melting point of less than body temperature so that it would melt in your hand. Some delegates tested this to find it was indeed true, and despite warnings, many left with gallium-stained hands!
Moving back to the periodic table, I moved on to the alkali metal series, particularly lithium, which has an atomic weight of around seven and is responsible for the naming of the once lithiated drink “7-UP.” However, lithium is now better known for batteries, and my presentation swung, as it often does, towards automotive electronics. I discussed the energy density of different fuels and postulated that a hydrogen fuel cell/lithium battery hybrid vehicle may provide a good compromise of properties in the near future. I ended as I started with a special version of the periodic table. This time, the table produced by the European Chemical Society showed the elements relative to their availability. Many elements that we rely on have limited availability, which poses a future supply risk.
Morning Sessions
EIPC conference delegates are accustomed to hearing from industry sage and elder statesman Walt Custer in the first keynote presentation. But Walt is suffering an ongoing mobility issue, so he entrusted me to deliver the keynote on his behalf. My presentation began with the words, “Brace yourself for some sobering news.” I explained that due to significant geopolitical concerns, such as inflation, tariffs, trade disputes, and Brexit, global manufacturing growth is slowing, and most sectors of the world electronic supply chain were now expanding more slowly or even contracting.
Data showed that European electronics sectors, except instruments, medical electronics, and aerospace, declined in 4Q’18. Walt’s customary detailed analysis and reasoning followed, ending with my conclusion that we should expect slowing growth, especially in Europe, with trade disputes impacting long-standing regional alliances, causing electronic assembly to shift globally to countries less affected by tariffs. However, there was good news in that there are many new electronic products on the horizon, and 5G will offer exciting opportunities for the next decade.
Erkko Helminen of TTM Technologies delivered the next presentation. Helminen took the delegates through the 5G roadmap for PCB producers, detailing the impact of shrinking geometries, lower noise budget, complexity, tightening tolerances, and the lower total loss budget, showing how each element could be addressed to meet the new demands. He also described future self-driving electric vehicles as data centres on wheels that may require up to 1,000 chips per vehicle by 2020 and create a data requirement of up to 4,000 GB per day. The new technologies required covered not only new materials and process technologies but also environmental aspects as OEMs are expected to be more active in pushing supply chain efforts on environmental sustainability. Helminen’s presentation ended with a thought-provoking slide showing near-future PCB technology drivers and the many challenges that need to be overcome in their delivery.
The next session on new trends for the imaging of PCBs, conductors, and solder mask was moderated by Tarja Rapala-Virtanen, EIPC’s new technical director.
The first presentation by our hosts, Elga Europe, was delivered by Ilaria Pasquali and focussed on the development of a new dry film resist (DFR) with high sensitivity and high pattern definition working with new laser direct imaging (LDI) systems.
Pasquali explained that new requirements for tighter tolerances allied with high production capacity had rapidly increased the need for LDI capabilities with a reliable dry film resist. LDI machines require not only a more sensitive DFR but also one suited to the precise wavelength of the imaging laser which could be 405 nm or 375 nm. Moreover, by reformulating the DFR photoinitiator system, Elga had produced a wide portfolio of DFRs that allowed high productivity and high definition with high adhesion performance for the latest generation of LDI machines.
Next to present was Uwe Altmann of Orbotech who spoke about solder mask direct imaging. Altmann began by detailing the development of direct imaging technologies from the late 1990s to the present-day Orbotech Diamond machine. The presentation showcased the benefits of speed, low print energies, accuracy, robustness, and low operational costs. Altmann also explained that the imaging technology used three UV wavelengths—365, 385, and 405 nm—to match the wide variety of solder resist materials available. The presentation concluded with a description of integration within the smart factory whereby the imaging system can access part-specific data “on the fly” to minimise setup time and maximise accuracy and traceability.
Page 1 of 2
Suggested Items
Indium Corporation, Industry Partners to Showcase Products “Live@APEX”
03/26/2024 | Indium CorporationIndium Corporation®, in cooperation with its industry partners, will feature its proven solder solutions live on the show floor throughout IPC APEX Expo from Apr. 9‒11 in Anaheim, Calif., U.S.
ITW EAE Wins New Product Introduction Award for Electrovert® Wave Soldering Machine Deep Wave
03/26/2024 | ITW EAEITW EAE is proud to announce that it has earned a 2024 New Product Introduction (NPI) Award for Electrovert’s Deep Wave option for wave soldering machines. This new, innovative system provides the ability to pump up to a 20 mm wave height.
Mek's Next-Gen AOI Technology Takes Center Stage at IPC APEX EXPO 2024
03/19/2024 | MEKMek is excited to announce its presence at IPC APEX EXPO, North America's largest electronics manufacturing event, in Anaheim, California, from April 6-11, 2024. Attendees are invited to visit Mek at booth #1433 to explore the latest AOI technology offerings.
Nihon Superior Sets New Standards in Lead-Free Soldering Technology at APEX 2024
03/13/2024 | PVANihon Superior Co. Ltd., an advanced joining material supplier, will exhibit in Booth 1325 during the 2024 IPC APEX EXPO, scheduled to take place April 9-11, 2024 at the Anaheim Convention Center in California.
Apollo Seiko Presents the Next Frontier in Non-Contact Soldering at 2024 IPC APEX EXPO
03/12/2024 | Apollo SeikoApollo Seiko, a leading innovator in soldering technology, is pleased to announce plans to showcase its latest advancements at Booth 1408 during the 2024 IPC APEX EXPO, taking place April 9-11, 2024 at the Anaheim Convention Center in California.