Technically Appropriate Material Choices are Key to Design Success


Reading time ( words)

Materials are no longer a passive part of the design; they play an active role in the manufacturability, reliability, and speed of a PCB. I-Connect007’s Nolan Johnson and Mike Creeden, founder of San Diego PCB Design, discuss several key characteristics that designers should consider in their material selection process.

Nolan Johnson: Mike, could you introduce yourself and tell us about what you’re working on?

Mike Creeden: I’m the founder of San Diego PCB Design, and I had the opportunity to sell the company to Milwaukee Electronics/Screaming Circuits, so we’ve joined the Milwaukee Electronics family of companies. I also serve as an EPTAC instructor for the IPC CID and CID+ programs as an MIT (master instructor).

Johnson: We’re focusing on the latest developments in materials, and it’s important to get a designer’s perspective. Who do you see as being the leading companies in this segment?

Creeden: When I think of the different materials and products that are out there, one company comes to mind. So, I’m going to give some propers to Insulectro, which is a distributor for many of the major laminate material products that exist. I want to talk about them because there’s a difference between good and great companies. A great company is one willing to go outside of the norm, do something that helps the designer, and supports technology development.

Their main customers are fabricators, yet time and time again, I’ve seen them supporting designers by trying to enhance their technical knowledge and capabilities. San Diego PCB has been collaborating with Insulectro for several years now and is looking for ways to collaborate more. They’re helping us to design better, and we’re utilizing products in a timely manner as they’re helping us solve our customers’ problems. To me, Insulectro is a significant player in this electronics material industry.

Johnson: Could you give some examples regarding how they’re helping and contributing?

Creeden: Absolutely. When I’m challenged with real estate and cannot put the required capacitors on the board because I have BGAs on both sides of a board, the team at Insulectro is a resource I can go to and ask for technology help. They suggested buried capacitance materials, which helps my power delivery and filters out noise on the board. Another example is that we’re seeing a lot more rigid and rigid-flex circuits. Insulectro has coached us to utilize materials that are appropriate for these types of boards, which has helped us grow in our understanding of rigid-flex development.

Further, they point us toward their fabrication partners, which is their customer base, and this helps us understand both the material and process. There’s always a learning curve for designers when it comes to rigid and rigid-flex. Some of the Pyralux® materials that DuPont brings have also been useful for us trying to get our product right from the beginning. Additionally, I’m seeing more microcircuitry and some very fine features that pose a challenge. Some of the dry-film materials that DuPont offers help us with circuits that require accuracy in the definition of microfeatures.

Two of Insulectro’s product lines—DuPont and Isola—have some new, cutting-edge materials as well as products that we have utilized for a long time. With the technology advancement of today’s circuits, we need a product line that stays ahead of the curve. Some of the basic standards that we’ve been using for years, including FR408s and 370s, have been staples in our industry for so long because they are high-performance materials. But with newer, high-speed circuitry, you must consider the material as an integral of the performance of the circuit. Again, their support and coaching have made me a better designer and my customers have better performing products.

Johnson: What’s intriguing to me is that you’re talking about materials early in the process. You’re talking to materials experts as you’re trying to figure out the layout of the board. When in the design cycle should PCB development people consider material selection?

Creeden: That’s a great question. It should be within the first days of starting your project because that’s the best time to establish that things will be designed “correct by construction.” I do not want to design a product and then consult my fabricator in the last days of development. If the material is not in stock, we may be delaying the procurement of what is probably a late design, anyway. You’d want to make sure that it’s in stock, and you’d also want the coaching from your fabricator and supply chain to make sure that you’re making correct selections. When you do this late in the process, selections may happen quickly, and there may not be enough time to ensure that it’s an appropriate material selection. There’s always a material technology decision, and it should be made early in the design process. The earlier, the better because this allows time to change it if that is required.

Share

Print


Suggested Items

Why Does the PCB Industry Still Use Gerber?

11/07/2019 | Karel Tavernier, Ucamco
Every so often, I hear technologists ask why so many PCB designers still use Gerber. That is a fair question. Ucamco has over 35 years of experience in developing and supporting cutting-edge software and hardware solutions for the global PCB industry. Our customers—small, medium, and large PCB fabricators—include the electronics industry’s leading companies, and many of them have been with us for over 30 years. We are dedicated to our industry and excellence in everything we do, which includes our custodianship of the Gerber format.

Communication, Part 5: Internet Impedance Calculators for Modeling

11/05/2019 | Steve Williams, The Right Approach Consulting LLC
Bob Chandler of CA Design and Mark Thompson of Prototron Circuits address how new engineers use internet impedance calculators for modeling (e.g., formulas versus recipes) in Part 5 of this series. Do you use impedance calculators that you found on the internet? Read on!

Insulectro and DuPont Experts Talk Flex Design

09/25/2019 | Mike Creeden, CID+, Insulectro
I recently spoke with Insulectro’s Chris Hunrath and DuPont’s Steven Bowles at the DuPont Technology and Innovation Center in Sunnyvale, California. We discussed a variety of topics related to flex design, including the support structure that’s needed in flex design, the everchanging world of flex materials, and the need for working with a flex fabricator as early as possible in the flex design cycle.



Copyright © 2019 I-Connect007. All rights reserved.