-
- News
- Books
Featured Books
- pcb007 Magazine
Latest Issues
Current IssueThe Growing Industry
In this issue of PCB007 Magazine, we talk with leading economic experts, advocacy specialists in Washington, D.C., and PCB company leadership to get a well-rounded picture of what’s happening in the industry today. Don’t miss it.
The Sustainability Issue
Sustainability is one of the most widely used terms in business today, especially for electronics and manufacturing but what does it mean to you? We explore the environmental, business, and economic impacts.
The Fabricator’s Guide to IPC APEX EXPO
This issue previews many of the important events taking place at this year's show and highlights some changes and opportunities. So, buckle up. We are counting down to IPC APEX EXPO 2024.
- Articles
- Columns
Search Console
- Links
- Events
||| MENU - pcb007 Magazine
Advances in Medical Diagnostics Using LoC and LoPCB Technologies
March 31, 2020 | Pete Starkey and Happy Holden, I-Connect007Estimated reading time: 14 minutes
Introduction
“The Coronavirus: A Global Pandemic” has become the universal headline. As of mid-March, the World Health Organization characterized the coronavirus as a pandemic, which had already spread to almost 150 countries, areas, and territories, with hundreds of thousands of confirmed cases.
Coronaviruses (CoVs) are a large family of viruses that cause illness ranging from the common cold to more severe diseases such as the Middle East respiratory syndrome (MERS-CoV) and severe acute respiratory syndrome (SARS-CoV). COVID-19 is a new strain that was discovered in 2019 and had not been previously identified in humans.
In an outbreak of a new virus, it is imperative that epidemiologic and clinical investigations are carried out as early as possible, and the recent emergence of COVID-19 precipitated a crucially urgent need to understand transmission patterns, severity, clinical features, and risk factors for infection. Effective testing can both confirm the presence of the disease in an individual and indicate the location, extent, and development of the outbreak.
Several techniques for detection and diagnosis of COVID-19 are currently under development, some of which may detect the novel virus exclusively; others may also detect strains that are genetically similar. A detection kit recently announced uses technology based on a portable lab-on-chip (LoC) platform capable of detecting, identifying, and differentiating MERS-CoV, SARS-CoV, and COVID-2019 in a single test, which integrates two molecular biological applications: polymerase chain reaction (PCR) and DNA microarray screening. Whereas traditional PCR coronavirus detection kits can take a day to produce results, the latest LoC detection kits can produce results in about two hours, and LoC technology may be the key to powerful new diagnostic instruments and point-of-care testing devices.
An LoC is a device that integrates one or several laboratory functions on a single integrated circuit. LoC devices are microelectromechanical systems (MEMS) devices (Figure 1) that function as "micro total analysis systems" (µTAS), generally using microfluidics principles to manipulate minute amounts of fluids. In practical terms, microfluidics is about doing chemistry on a tiny scale and trying to emulate nature. Biomedical microelectromechanical systems (BioMEMS) have emerged as a subset of MEMS devices for applications in biomedical research and medical microdevices, with an emphasis on mechanical parts and microfabrication technologies. Applications include disease detection, chemical monitoring, and drug delivery. There has been rapid market growth for bioMEMS technologies, and many bioMEMS devices are already commercially available; a familiar example is a blood-glucose sensor. There is also great potential for large-scale commercialization of microfluidic-based LoC technologies.
Figure 1: (a) MEMS; (b) MEMS integrated into tires for pressure sensing; (c) MEMS used as micromirrors for image projection and communications; (d) integrated MEMS.
LoC is not new. In fact, as long ago as the late 1990s, advances in microfabrication technology had enabled the development of a fully automated LoC, designed to integrate sample preparation, fluid handling, and biochemical analysis. Techniques derived from semiconductor manufacturing enabled the translation of experimental and analytical protocols into chip architectures comprising interconnected fluid reservoirs and pathways (Figure 2). By driving fluids in a controlled manner through selected pathways by electrokinetic or pressure forces, it was possible to create the functional equivalent of valves and pumps capable of performing manipulations, such as dispensing, mixing, incubation, reaction, sample partition, and detection.
The first commercially available LoC product was introduced in 1999 for the analysis of DNA and RNA biomolecules, as well as protein and cell assays, with worldwide sales of more than 7000 instruments. These LoC bioanalyzers could handle nucleic acids, proteins, and cells on the same platform using sample-specific reagents and chips and set an industry-standard for RNA analysis and sequencing. LoC for integrated chemical and biochemical analysis has also grown dramatically in the past decade. Although the primary focus has been on medical uses, the basic technology is applicable to a wide variety of analytical and monitoring functions and fits very logically into the concept of a connected world (Figure 2).
Microfluidic devices can be fabricated with a variety of materials—including glass, rigid polymers, and elastomers—using techniques such as CNC milling, injection molding, and photolithography. The original material was silicon since the fabrication techniques had been derived from semiconductor manufacture, and several alternative processes have been developed because of requirements for specific material properties, as well as lower production costs and faster prototyping. A wide variety of sophisticated chips are increasingly being demonstrated, but it is believed that few of these will be seen on the general market because of the lack of established commercial manufacturing technology. 3D printing has recently emerged as an alternative approach for the fabrication of fluidic devices and may replace soft lithography as a preferred method for rapid prototyping. But existing technologies are not unified, and it remains to be seen which processes and materials will eventually be adopted for high throughput diagnostics.
Figure 2: BioMEMS LoC. (Source: HP Laboratories, 1995)
Page 1 of 5
Suggested Items
AIM to Highlight NC259FPA Ultrafine No Clean Solder Paste at SMTA Wisconsin Expo & Tech Forum
04/18/2024 | AIMAIM Solder, a leading global manufacturer of solder assembly materials for the electronics industry, is pleased to announce its participation in the upcoming SMTA Wisconsin Expo & Tech Forum taking place on May 7 at the Four Points by Sheraton | Milwaukee Airport, in Milwaukee, Wisconsin.
Hentec/RPS Publishes an Essential Guide to Selective Soldering Processing Tech Paper
04/17/2024 | Hentec Industries/RPS AutomationHentec Industries/RPS Automation, a leading manufacturer of selective soldering, lead tinning and solderability test equipment, announces that it has published a technical paper describing the critical process parameters that need to be optimized to ensure optimal results and guarantee the utmost in end-product quality.
Empowering Electronics Assembly: Introducing ALPHA Innolot MXE Alloy
04/16/2024 | MacDermid Alpha Electronics SolutionsIn the rapidly evolving electronics industry, where innovation drives progress, MacDermid Alpha Electronics Solutions is committed to setting a new standard. Today, we are pleased to introduce ALPHA Innolot MXE, a revolutionary alloy meticulously engineered to address the critical needs of enhanced reliability and performance in modern electronic assemblies.
New Book on Low-temperature Soldering Now Available
04/17/2024 | I-Connect007I-Connect007 is pleased to announce that The Printed Circuit Assembler’s Guide to… Low-temperature Soldering, Vol. 2, by subject matter experts at MacDermid Alpha Electronics Solutions, is now available for download.
Inkjet Solder Mask ‘Has Arrived’
04/10/2024 | Pete Starkey, I-Connect007I was delighted to be invited to attend an interactive webinar entitled “Solder Mask Coating Made Easy with Additive Manufacturing,” hosted by SUSS MicroTec Netherlands in Eindhoven. The webinar was introduced and moderated by André Bodegom, managing director at Adeon Technologies, and the speakers were Mariana Van Dam, senior product manager PCB imaging solutions at AGFA in Belgium; Ashley Steers, sales manager at Electra Polymers in the UK; and Dr. Luca Gautero, product manager at SUSS MicroTec Netherlands.