-
- News
- Books
Featured Books
- pcb007 Magazine
Latest Issues
Current IssueThe Sustainability Issue
Sustainability is one of the most widely used terms in business today, especially for electronics and manufacturing but what does it mean to you? We explore the environmental, business, and economic impacts.
The Fabricator’s Guide to IPC APEX EXPO
This issue previews many of the important events taking place at this year's show and highlights some changes and opportunities. So, buckle up. We are counting down to IPC APEX EXPO 2024.
Getting to Know Your Designer
In this issue, we examine how fabs work with their design customers, educating them on the critical elements of fabrication needed to be successful, as well as the many tradeoffs involved. How well do you really know your customer? What makes for a closer, more synchronized working relationship?
- Articles
- Columns
Search Console
- Links
- Events
||| MENU - pcb007 Magazine
8 Measures for Sales and Operations Planning in Turbulent Times, Part 5
August 5, 2020 | Fane Friberg, CEPHASEstimated reading time: 1 minute
In this series, CEPHAS principal Fane Friberg highlights the interdependent elements of an effective S&OP process for leaders of supply chain management. While some companies tend to fall back on the status quo, Freiberg highlights why it’s critical to actually increase the frequency of the S&OP rather than decrease the operations. He has reviewed the importance of staying committed, strategic imperatives, participation, and technology. Today, he discusses rough-cut capacity planning.
Focus #5: Rough-Cut Capacity Planning
After the S&OP data is loaded, now you need to look at your rough capacity. Is the current demand profile going to be facilitated by your business operations? Are there enough human resources in the correct skillset for the schedule? What about machines and methods?
This step is used as an acid test to ensure that the manufacturing control/execution system or job shop environments can react adequately to the changes, including internal disturbance (e.g., equipment failures, rework) and external disturbance (e.g., variations in customer demand); on the other hand, one must optimize multiple logistic objectives and have short throughput times, low work-in-process (WIP) rates and high schedule reliability to achieve the plan.
This validation point is to substantiate that the enterprise can deliver quality goods-and-services on-time within the existing cost structure. This is not the step to force schedule compression, overtime, expedites, etc. This is a good point in the process to highlight your constraints and begin to strategize how to exploit the constraint(s) and subordinate everything else in the analysis.
For example, James Clear posted the following idea [1]:
“When failure is expensive, plan carefully.
When failure is cheap, act quickly.”
References
- J. Clear, “3-2-1: On failure, the importance of teaching, and handling the expectations of others,” February 20, 2020.
Fane Friberg is principal of CEPHAS.
Suggested Items
ASMC 2024 to Showcase AI, Smart Manufacturing and Sustainability to Advance Chip Industry Manufacturing Expertise
03/27/2024 | SEMIMore than 125 experts will offer insights into the latest semiconductor manufacturing strategies and methodologies as hundreds of industry stakeholders gather at the 35th annual SEMI Advanced Semiconductor Manufacturing Conference (ASMC 2024), May 13-16 in Albany, New York.
Mycronic to Showcase More Versatile, High-productivity Assembly Solutions at IPC APEX EXPO 2024
03/27/2024 | MycronicMycronic, the leading Sweden-based electronics assembly solutions provider, will continue to respond to growing customer demand for high-flexibility, high-productivity solutions for zero-defect PCB assembly at IPC APEX EXPO 2024 in Anaheim, CA on April 9 - 11.
IPC APEX EXPO 2024: LPKF—Debunking Depaneling Industry Perceptions
03/27/2024 | Nolan Johnson, I-Connect007In this audio interview, listen to Jake Benz discuss advances in laser depaneling at LPKF. Thanks to advances in laser technology, perceptions about laser depaneling are changing from a low-speed, specialized process to a high volume process suitable for production manufacturing. Benz elaborates on some of the development and engineering that went into creating their latest, most capable depaneling machines.
The Many Complexities of PFAS
03/26/2024 | Marcy LaRont, PCB007 MagazineIn its simplest definition, PFAS is a group of chemicals used to make fluoropolymer coatings and products that resist heat, oil, stains, grease, and water. Fluoropolymer coatings can be in a variety of products. Though this definition is not inaccurate, it can be misleading. Depending on who you ask, there are upward of 10,000 PFAS chemistries that can meet various definitions.
New North American Product Family Release from Smart Factory Design
03/22/2024 | Smart Factory DesignSmart Factory Design is pleased to announce a new system technology and supply chain model for providing Zero Liquid Discharge (ZLD) Wastewater Recycling Systems to the North American market. Smart Factory Design is an international public benefit company focused on environmental sustainability and autonomous processes for the Printed Circuit Board, IC Substrate, and General Metal Finishing industries.