Functional Inkjet Printing in PCB Manufacture

Reading time ( words)

Pete Starkey speaks with Dr. Luca Gautero, product manager at SUSS MicroTec Netherlands B.V., about advances in inkjet printing, even outside the lab.

Pete Starkey: I’m delighted to speak with Dr. Luca Gautero, product manager at SUSS MicroTec Netherlands, in Eindhoven, who has responsibility for functional inkjet as an additive process in PCB manufacture, with particular emphasis on digital solder mask.

Luca, it’s good to meet with you. I’ve heard a lot about you and read some of your published work on functional inkjet printing.

Luca Gautero: Likewise, Pete, nice to meet you. Your voice and your interviews have been very inspiring for many. I somewhat think that you almost single-handedly created the market need for inkjet printing, didn’t you?

Starkey: I don’t think so, Luca, but I have certainly followed the progress of the technology for more than 20 years since I recognised the potential opportunities for inkjet printing in PCB manufacture. During that time, I have been closely involved with several development groups, both in the equipment and the materials areas, and I have attended and reported on numerous conferences and symposia, as well as speaking with many exhibitors at the trade shows. Solder mask has always been an ultimate objective, but realistically unattainable until recently, for a variety of reasons. It has to do, partly, with printer capability, and partly with ink printability. The formulators have had a difficult job because solder mask becomes a permanent material feature of the PCB and is subject to critical qualification and approval. Generally, if an ink would jet, it wouldn’t pass qualification; and if it would pass qualification, it wouldn’t jet! But because of equipment developers like yourselves working closely with ink formulators, it appears that the ultimate objective has been realised.

So, Luca, please tell us a little about your experience in equipment design and development in the electronics and semiconductor industry.

Gautero: I’ll do my best to keep it short. My experience throughout time and market is best described as someone who improves the given equipment toward a cheaper, faster, or enhanced production. This started during my academic time at Fraunhofer ISE, where a complete photovoltaic pilot line gave the possibility for PhD candidates like me to make the most of each tool installed. Once in the private sector, this approach has continued on several kinds of coatings: anti-reflective, passivation, moisture barrier, semicon packaging, and now, solder mask coating. All of these need a cheaper manufacturing on a larger surface area.

To read this entire interview, which appeared in the February 2021 issue of PCB007 Magazine, click here.



Suggested Items

Focus on Smart Processes, Not Just Smart Factories

03/02/2021 | Nolan Johnson, PCB007
Nolan Johnson talks to Audra Thurston, Todd Brassard, and Meredith LaBeau about how Calumet is focusing on smart processes, and not as much on smart factories. While modern manufacturing equipment and next-gen technologies can be impressive, so much innovation still hinges on human beings. Calumet believes by investing in their workforce and instilling a culture of innovation throughout their company and supply chain, they’ll see faster advancement.

The Future of Imaging and Inkjet Printing

01/27/2021 | I-Connect007 Editorial Team
We recently spoke to Ed Carignan of Technica, who outlines the current landscape for both direct imaging and inkjet printing and describes how the technologies have evolved over the years. He also details what’s next on the horizon.

I-Connect007 Editor’s Choice: Five Must-Reads for the Week

12/18/2020 | Andy Shaughnessy, Design007 Magazine
Some years, the middle of December is marked by a distinct lack of news in PCB design, fabrication and assembly. Much of the industry often takes off around this time to get a head start on the holidays, or to squeeze in a much-needed vacation. But 2020 is not one of those years. Most of us aren’t traveling anywhere farther than the refrigerator this year, and everyone seems to still be working, albeit from their home offices. And companies in the PCB community continue to make news.

Copyright © 2021 I-Connect007. All rights reserved.