Basic Principles of Polymer Thick Film Flexible Circuits


Reading time ( words)

Polymer thick film (PTF) technologies have been used to manufacture printed circuits for decades. In fact, some of the very first circuits ever produced in volume were made by printing conductive inks patterned on an insulating substrate using a stencil. While the versatile nature of the materials used and the simplicity of the manufacturing process have made possible its continued use for more than six decades. In more recent decades, the technology has seen extensive use in the manufacture of inexpensive, polyester film-based membrane switches for electronic devices of every imaginable type, from hand-held calculators and computer keyboards to household appliances including microwave ovens and washers and dryers and beyond.

Polymer thick film circuits are similar in many ways to their rigid and flexible counterparts; however, because of the materials and processes, they have their own very specific design rules. Because most PTF processing is most commonly based on screen printing technology, the limits of design are intrinsically linked to the printed ink’s processing considerations and limitations. For example, there are the unique processing properties for conductive and resistive as well as insulating inks in terms of their thixotropy, which influence their printability. There is also the important consideration of the final values for the conductivity and/or resistivity of the ink used when cured. In addition, there are also the limits of the screen printing materials and the processes used.

Traditional screen printing methods are typically limited to the production of relatively course features (e.g., 250 µm). However, very fine-featured screen printed circuit technology has been reported down to ranges closer to 125 µm. For the foreseeable future, screen printing will remain an important technology for the manufacture of PTF circuits, both rigid and flexible. That said, inkjet printing is well positioned to augment time honored screen print methods. It also opens the door to realizing the possibility of producing circuits economically at a run unit of one, which has been one of the ideals of manufacturing. 

Read the full article here.


Editor's Note: This article originally appeared in the June 2014 issue of The PCB Magazine.

Share

Print


Suggested Items

MivaTek’s New Technology and Market Drivers

01/19/2021 | Nolan Johnson, PCB007 Magazine
I recently spoke with Brendan Hogan about the upcoming new product releases from MivaTek. The conversation flows naturally from the new product’s market drivers to the X=Xc – 1 idea that is at the core of the market drivers.

Happy Holden: ECWC15 Virtual Event a Success

12/15/2020 | Happy Holden, I-Connect007
This is the first Electronic Circuits World Convention that I have not attended in person since 1978. To refresh your memory, these are held every three years on a rotating basis. The HKPCA hosted this year’s conference and they kept up the fine tradition of collecting outstanding keynotes, nearly 60 technical presentations and myriad poster papers. HKPCA was also kind enough to provide English slides and translations. It is still possible to sign up and view the presentations. I have listened to 20 of the presentations, and hope to attend even more in the coming days as they are all worth watching.

I-Connect007 Editor’s Choice: Five Must-Reads for the Week

12/11/2020 | Nolan Johnson, I-Connect007
This week’s mainstream news was dominated—well, my personalized online news feed was, at least—by ballistics. SpaceX was in the news daily for lobbing multiple pieces of iron, even as their CEO took his household suborbital, leaving California and touching down in Texas. Pandemic numbers charts continue their skyward trajectory worldwide. The ever-present military tests and technology demonstrations, seemed a bit more commonplace this week as well. Worldwide political news, in general, seemed to follow parabolic curves like an Australian boomerang, veering off in unexpected ways only to suddenly cut a curving path and return.



Copyright © 2021 I-Connect007. All rights reserved.