EPTE Newsletter from Japan: Practical Progress in Advanced Materials


Reading time ( words)

FINE TECH JAPAN 2015 – a popular trade show for advanced materials – was held at Tokyo Big Sight a couple of weeks ago. The three-day trade show began on April 8, and included two related events – Photonix 2015 and Advanced Material World 2015. Concurrent shows included Film Tech Japan, Metal Japan, Plastics Japan and Ceramic Japan. More than a thousand companies and organizations were represented at the show and used up all the available floor space. Most of the companies reserved mid- or small-sized booths, and the only foreign companies in attendance hailed from Taiwan and Germany.

The name of the trade show gives away the types of products on display – advanced materials. A few keynote speakers that represented larger material companies featured products that were supposed to be revolutionary, but this was not the case. Their presentations were regurgitated from last year. I remember thinking to myself that these companies have had no significant breakthroughs in technology or processes in the last few years. On the other hand, there were a few smaller companies that introduced a few innovative products that could have some practical use.

Flat panel displays and touchscreen panels used to be the predominant products at the convention; however, a lot of businesses from Japan have already shifted to Korea and Taiwan. For this reason, there was not too much promotional activity or presentations from this segment. Taiwanese companies were very state-of-the art with their displays.  While their booths were relatively small, they exhibited completed display devices including OLED modules and touch panels.

Printable electronics and RTR (Roll to Roll) manufacturing were included in many sales presentations. A few years ago, many companies promoted this segment as the next greatest breakthrough for the industry. Nowadays, many companies that play in these areas no longer promote the segment this way, instead, they displayed some small but practical developments assuming actual applications.

Jujo Chemical rolled out a new transparent conductive paste for a screen-printing process earmarked for flexible optical devices. The basic materials remain the same as previous generations, but the new paste has improved process capabilities with improved physical performances. Asahi Chemical Laboratory introduced a couple of new screen-printable inks – fine silver paste and graphite paste. Mino Group, a major printing equipment supplier, demonstrated a hybrid process for screen-printing and transfer printing for fine printing on non-flat surfaces. And lastly, Nakanuma Art Screen introduced a new screen mask with a high dimensional stability made from a photo-etching process.

Toray Engineering, a major RTR equipment supplier, introduced a couple of new patterning processes using thermal in-printing and laser patterning for fine patterning during the RTR process. Ushio, a major photo device supplier, unveiled a new patterning system called VUV-Aligner for use in printing transistor devices. Fuji Shoko, a supplier of RTR machines, demonstrated a compact RTR stamping machine. There were no innovative technologies on display, but there were many new practical ideas brought fourth from experts who have been in the industry for many years. The machines on display were custom-made, and I am sure that these new RTR machines work with high reliability.

I may have missed a few newly rolled-out technologies and products because the convention was so big. I look forward to next year's show and the chance to discover that one technology that everyone can’t live without.

Headlines of the week

(Please contact haverhill@dknreseach.com for further information of the news.)

1. Solar Frontier (Major photovoltaic cell supplier in Japan) 4/2

Has started the operation of the 4th manufacturing plant in Miyagi Prefecture for CIS thin film photovoltaic cells with a capacity of 150 MW per month.

2. Toshiba (Major electric & electronics company in Japan) 4/6

Has opened a new R&D center of hydrogen energy in Fuchu Plant targeting 100 billion yen revenue by the year of 2020.

3. DNP (Major printing company in Japan) 4/3

Has developed a new blue resist with high brightness for the manufacturing of the LCD color filters.

4. Toppan printing (Major printing company in Japan) 4/6

Has developed a new3D touch screen panel module with copper mesh for automobile displays.

5. Sony  (Major electronics company in Japan) 4/7

Will increase the manufacturing capacity of CMOS image sensor devices in Yamagata Plant to 87000 wafers per month from 60000 wafers per month.

6. Yokowo (Electronic component supplier in Japan) 4/10

Has developed a new thin LTCC substrate with high heat radiation for LED devices. Thickness range: 0.075 ~ 0.15 mm.

7. Kyocera (Major electronics company in Japan) 4/9

Will commercialize a new end mil “MFH mini” with a new chip shape for various hard metallic materials.

8. Furukawa Electric (Major cable manufacturer in Japan) 4/14

Has agreed to found a new JV with Fanuc for the manufacturing of the high power lase diode modules.

9. Ricoh (Major electronics company in Japan) 4/14

Has started a quick delivery service of parts and tooling for the manufacturing plants using 3D printers.

10. Fuji Film (Major film material supplier in Japan) 4/15

Has developed a new high density recording technology on barium ferrite base magnetic tape with 220 TB per reel. (123 Gbpsi)

Recent Articles of DKN Research

Please find the full articles here.

Dominique K. Numakura, dnumakura@dknresearch.com

DKN Research, www.dknresearchllc.com

To see previous newsletter, please click here.

Share

Print


Suggested Items

The Institute of Circuit Technology Autumn Seminar

10/03/2019 | Pete Starkey, I-Connect007
Meriden has been established as a popular Midlands venue for Institute of Circuit Technology (ICT) meetings. On September 19, a multitude of Fellows, Members, and Associates gathered for the Institute’s autumn seminar, which was organised and hosted by ICT Technical Director Bill Wilkie. The agenda included five informative technical presentations, describing current research and development on significant topics relevant to the industry.

How to Feed Test Data Back to Engineering for Process Improvement

08/01/2019 | Todd Kolmodin, Gardien Services
Some people think of the PCB manufacturing process as a black box: design data goes to the manufacturer (fabrication house), and magically, the finished PCB is produced. While it may have been like that in the past, in actuality, fabricating PCBs today is quite a ballet of processes.

A Guide to High-reliability PCBs from Design to Specification

07/24/2019 | Jeff Beauchamp, NCAB Group
Creating reliable PCBs is an outcome of considering all aspects that can affect reliability as early as possible in the design process. The further down the design process, the more expensive and risky it can be to fix. As they say, everything starts with the design. Because a good board design improves the reliability of the end product and lessens the risk of failure.



Copyright © 2019 I-Connect007. All rights reserved.