Digital Imaging Revisited


Reading time ( words)

The advantages of digital circuitization techniques have been described in detail by suppliers of equipment and photoresist. Since phototool generation and conditioning are omitted, there is the advantage of shorter lead time. Small lots can be customized at no extra cost (e.g., with added date and lot number information). There may be an advantage in fine-line imaging of surfaces with poor co-planarity because of the depth of focus of the laser beam. But the biggest advantage may be the ability to “scale” (i.e., to change the dimension of each individual exposure for best fit to reference points on an underlying pattern of a multilayer structure). However, early digital imaging systems had substantial drawbacks, such as Orbotech’s DP100, which used an argon ion laser with limited radiation power, high power usage, and high cooling requirements.

For years, laser direct imaging (LDI) was synonymous with digital imaging. While most early, commercially successful digital processes involved the use of lasers, other more recent processes use non-laser light sources such as LEDs (light emitting diodes), or various  types of mercury lamps, making use of more than one wavelength. Others use inkjet technology to build image patterns such as legend print, soldermask or etch resist. They all have in common the building of a pattern, pixel by pixel, and they employ digital on/off switches to form the pattern. The switch might be an optical modulator or an array of LCPs (liquid crystal polymer cells) that can be rendered translucent or opaque by addressing it with an electrical pulse.

Read the full article here.

Editor's Note: This article originally appeared in the November 2015 issue of The PCB Magazine.

Share

Print


Suggested Items

EIPC Summer Conference 2019, Day 2

09/12/2019 | Alun Morgan, EIPC
In this article, EIPC Chairman Alun Morgan provides the highlights of the second day of the EIPC 2019 Summer Conference, which was held in the beautiful city of Leoben in central Austria. He also talks about key points of the numerous technical presentation at the conference.

EIPC Summer Conference 2019, Day 1

09/10/2019 | Alun Morgan, EIPC
The beautiful city of Leoben in central Austria provided the setting for the EIPC 2019 Summer Conference. In this article, EIPC Chairman Alun Morgan provides the highlights of the first day of the event, including a recap of the technical presentations.

Solder Mask Curing: UV Bump Overview

08/19/2019 | Nikolaus Schubkegel
Ultraviolet (UV) bump, also called UV cure, is a processing step in which the solder mask pattern is irradiated with ultraviolet and infrared light. This step is performed with special equipment that is built as a continuous flow system, which consists of a conveyor belt and tubular UV lamps mounted above and below the belt. Read on to find out more about this process.



Copyright © 2019 I-Connect007. All rights reserved.