Lost your password?
Not a member?
Resend confirmation instructions
Sort By Category
- New Technology
- Printed Electronics
- New Products
- Test & Inspection
- Fabrication Process
- IPC Standards
- From The Show
Technica and Wise Partner For Atmospheric Plasma Cleaning
04/02/2020 | Real Time with...IPC
The Direction of MacDermid Alpha’s Automotive Initiative
04/02/2020 | Nolan Johnson, I-Connect007
IPC’s Dr. John Mitchell Commends U.S. Manufacturers and Governors
04/01/2020 | Barry Matties, I-Connect007
Todd Kolmodin: Gardien an Essential Business for U.S. DoD Work
03/30/2020 | Nolan Johnson, PCB007
Dan Beaulieu: Adapting to New Methods at D.B. Management
03/27/2020 | Nolan Johnson, I-Connect007
'Coatings Uncoated!' Webinar Series and Automotive Industry Trends
Phil Kinner, global business/technical director of Electrolube’s coatings division, tells Pete Starkey about the positive impact of the “Coatings Uncoated!” webinar series and comments on how the company has responded to the changes in the focus of the automotive industry.
Arlon Takes on High-Power Failure
In this video interview from IPC APEX EXPO, Pete Starkey and Dave Nelson, director of business development at Arlon Electronic Materials, explore causes of failure in high-power PCBs and explain how resin cracking during drilling can be overcoming using thermally conductive filled resin.
The Formation of the Printed Circuit Engineering Association
Patty Goldman spoke with Gary Ferrari, FTG Corporation, at IPC APEX EXPO 2020 about the formation of the Printed Circuit Engineering Association, which—having been started two months ago—has attained lots of interest from the industry. The PCEA hopes to bring together designers, engineers, fabricators, assemblers through local chapters to focus mainly on education and learning.
Technica and Wise Partner For Atmospheric Plasma Cleaning
In this video interview from IPC APEX EXPO, Technical Editor Pete Starkey speaks with Frank Medina, president and CEO of Technica USA, who introduces Massimo Passerini, VP of Wise, and the revolutionary Wonderwise system for cleaning double-sided atmospheric plasma.
The Direction of MacDermid Alpha’s Automotive Initiative
Nolan Johnson speaks with Lenora Clark about MacDermid Alpha’s automotive initiative, where her role fits into the company’s focus on supporting carmakers in various business areas, and where the future of automotive is heading.
Siemens and Valor: Two Complementary DFM Technologies
Before IPC APEX EXPO kicked off, Andy Shaughnessy attended a Siemens seminar in San Diego on smart manufacturing for electronics and the integration of technologies from Siemens’ digital industry software and Valor. Afterward, Andy spoke with Andy Farrington, director of portfolio development for the Americas, about the event, as well as some of the hot topics and solutions that the speakers addressed.
IPC’s Dr. John Mitchell Commends U.S. Manufacturers and Governors
On March 31, Dr. John Mitchell, IPC president and CEO, gave Barry Matties an update on the industry response to COVID-19 since their conversation on March 20. Mitchell provides an overall update on the industry, commending U.S. manufacturers for their proactive responses.
Industry Outlook With Siemens’ Fram Akiki
In this video interview from the show, Editor Dan Feinberg speaks with Fram Akiki, VP of electronic and semiconductor industries for Siemens, about the biggest challenges in the electronics industry. They also discuss major industry trends, including smart connected devices used in autonomous transportation and robotics, increased complexity, and a reduced time to market.
Advances in Medical Diagnostics Using LoC and LoPCB Technologies
Several techniques for detection and diagnosis of COVID-19 are currently under development, some of which may detect the novel virus exclusively; others may also detect strains that are genetically similar. A detection kit recently announced uses technology based on a portable lab-on-chip (LoC) platform capable of detecting, identifying, and differentiating MERS-CoV, SARS-CoV, and COVID-2019 in a single test.
BGA Standard Update With Ray Prasad
In this video interview from the show, Ray Prasad, president of Ray Prasad Consultancy Group, updates Guest Editor Joe Fjelstad on the ongoing work with the BGA standard and the latest revision that is going to ballot.
With DIS, Accurate Registration is Everything
In this video interview from the show, Technical Editor Pete Starkey and Jesse Ziomek, VP of sales for DIS, discuss how the company achieves ultimate accuracy in layer-to-layer registration, not just in rigid multilayers, but also in flex and rigid-flex builds. Jesse also comments on keeping technology exciting enough to attract young engineers into the industry.
Todd Kolmodin: Gardien an Essential Business for U.S. DoD Work
Todd Kolmodin, VP of quality for Gardien Services USA, updates Nolan Johnson on Gardien’s operations. Specifics include Gardien’s certification as an essential business for U.S. Department of Defense work and an overview of the work and staffing policies in place at all of the company's facilities across the United States and the various work restrictions—all with the goal of “keeping the wheels turning” in the industry.
Dan Beaulieu: Adapting to New Methods at D.B. Management
In this audio interview, Nolan Johnson gets an update from Dan Beaulieu, a 40+ year veteran of the electronics manufacturing industry and an industry consultant for 25+ years. Dan shares an update on current business operations for D.B. Management, including how—like his clients—he may be at home, but it's still business as usual. Dan also offers his perspective on how our industry will weather and emerge from this challenging time.
I-Connect007 COVID-19 Outbreak Research Survey Results
Our ongoing survey regarding the effects of the COVID-19 outbreak on the electronics industry has produced some interesting results. Here are some of the response highlights as of today. If you would like to make your voice heard, please take the survey.
EPTAC Preparing Young People for Future in Industry
In this video interview from the show, Guest Editor Kelly Dack and Leo Lambert, VP/technical director of EPTAC Corporation, describe the impact of internships and apprenticeships, the importance of IPC specifications, the effectiveness of certification.
The Smart Factory: All the Bits and Bobs
“Smart factory” is another phrase that describes Industry 4.0 programs. These programs seem to have replaced CIM and CAM, but it did not make them obsolete. While these topics are getting a lot of press, there is nothing new about them. We have been on a journey to automate manufacturing since the mid-‘70s. What has evolved are faster and cheaper computers, and more complex and integrated networking.
Matt Stevenson on Sunstone Circuits' Current Operations
Nolan Johnson speaks with Matt Stevenson, VP of marketing at Sunstone Circuits, who shares an update on the company's current level of business operations under COVID-19 restrictions. Stevenson confirms that Sunstone Circuits is fully operational and classified as an essential business.
This Month in PCB007 Magazine: A Scorecard for Suppliers
Al Block and Naji Norder from National Instruments talk about the PCQR2 tool, what that entails, and how companies can use the data-driven analysis to validate the quality of suppliers and potentially save millions.
InduBond Gets Hot With Induction Heating Lamination
In this video interview from the show, Editor Nolan Johnson sat down to speak with Víctor Lázaro, InduBond’s R&D director and technical manager, about InduBond's latest technology for panel lamination utilizing induction heating. InduBond demonstrates a lamination oven on the IPC APEX EXPO show floor, as well as the advantages of the technology.
What It Takes to Be a Milaero Supplier, Part 2
The decision to pursue military and aerospace (milaero) certification impacts every facet of the organization, and not every shop is prepared to make this transformation. In Part 2, Anaya Vardya focuses on what it takes to be a milaero supplier in the areas of engineering and CAM.
IPC APEX EXPO 2020 Attendees Speak: Heston Singh
"We have been coming here for many years, and we had another good experience this year," said Unitron's Heston Singh. "If it wasn’t good, we wouldn’t be coming back. They have products that are needed for this market, so we’ll be back every year."
IPC Chief Economist Dr. Shawn DuBravac Shares Industry's Financial Outlook
On March 23, IPC Chief Economist Shawn DuBravac, Ph.D., CFA, spoke with I-Connect007 publisher Barry Matties in an exclusive phone interview immediately following DuBravac’s online briefing to IPC member attendees.
Audio Interview With IPC President and CEO Dr. John Mitchell: COVID-19 Global Industry Update
On March 20, Dr. John Mitchell, IPC president and CEO, spoke with I-Connect007 publisher Barry Matties in an exclusive phone interview with updates on COVID-19-related current events in the manufacturing industry. In this information-packed 14-minute audio interview, Dr. Mitchell shared key takeaways from Friday’s IPC Executive Forum conference call.
Book Review: The 10 Stories Great Leaders Tell
Everyone is talking about stories, and rightfully so. Anyone who knows anything about marketing in the 21st century knows that the way to get into peoples’ heads is to tell them a story. Dan Beaulieu reviews Paul Smith's 'The 10 Stories Great Leaders Tell.'
Alumni Week at IPC APEX EXPO 2020
When you see friends and colleagues just once a year, you would think there would be a lot of catching up to do. That’s not the case at IPC APEX EXPO. Greeting friends and colleagues is always like picking up a conversation you had with them yesterday. Everyone looks the same, acts the same (we age well and lightly!), and we talk about the same things with just slight modification—like a daily conversation would evolve.
I-Connect007 Research: Readers Share Advice on COVID-19
In our survey this week, we asked readers what advice they might have for friends and colleagues in the electronics industry regarding the COVID-19 outbreak. Because this survey question was open-ended, some respondents shared more than one piece of advice; therefore, astute readers may notice that the graph totals more than 100%.
One Year Later: IPC Education Foundation Update
In this video interview from IPC APEX EXPO, Aaron Birney, education program manager for the IPC Education Foundation, speaks with Guest Editor Steve Williams about the foundation's focus on STEM, its growth over the past year since launching at IPC APEX EXPO 2019, and how IPC members can get involved and sponsor student chapters.
Best Practices Highlighted at the 2020 IPC EMS Management Meeting
The key challenge at the top of EMS leaders’ minds during roundtable discussions was the lack of skilled workers. Leaders brainstormed solutions like creative identification and sourcing of talent outside of the manufacturing sphere, leveraging the flexibility of smaller businesses to make changes attractive to potential employees as well as cooperation with IPC and other talent development programs. John Mitchell updated the group on the IPC Education Foundation (IPCEF) and workforce initiatives to build and support workforce needs. The group welcomed Andy Marris of MRA, who discussed motivating and engaging an existing workforce to create a competitive advantage.
DownStream: Smoothing out the Post-Processing Bumps
In this video interview from the show, Joe Clark, co-founder of DownStream Technologies, gives Guest Editor Kelly Dack an overview of the company and their innovative product line, which serves to smooth the bumps that can occur between source design output and manufacturing line input. As Joe explains, 2019 was a great year for the company, and he expects that trend to hold through 2020.
Trends From the Show: Solder and Software
In my role as a media representative, my perspective on IPC APEX EXPO may be a bit different from that of many attendees. Since the I-Connect007 team had the opportunity to talk to many attendees and exhibitors and listen to their stories over the course of the week, our view can be particularly wide. When I reflected on all the conversations, pieces from all throughout the week coalesced and provided a different understanding of and takeaway from the show.
DOX Electronics Discusses New DoD Cybersecurity Requirements
In this video interview from the show, Managing Editor Nolan Johnson speaks with two DOX Electronics technologists, founder and VP Ken Michael and senior account executive Larry Cohen, about the new government cybersecurity requirements necessary to deliver DoD contracts. Ken and Larry also share their upcoming presentation on business security measures, both digital and physical. If you’re bidding on DoD contracts, you won’t want to miss this video.
Advantages of Using ZIF Connectors as a Termination Method
There are many types of connectors and termination methods available when designing a flexible circuit. One of the most common is the zero insertion force (ZIF) connector. The reason why the ZIF connector is so popular is that they eliminate the requirement for an added connector. They create a direct connection from the circuit to the mating connector reducing overall weight and cost. Here are a few general facts about ZIF connectors.
Are Trade Shows at a Crossroads?
With the cancellation of this year’s E3 show, the biggest gamer conference, the event’s format is shifting to a more fluid, online communication method. This may be the wave of the future. Can you imagine if the COVID-19 outbreak had occurred just three months earlier? Would there have been a Consumer Electronics Show, DesignCon, or IPC APEX EXPO? If the coronavirus is still in play in six months, will these shows take place in 2021?
IPC APEX EXPO 2020 Attendees Speak: Travis Smith and Mindy Sanchez
"I’m seeing a lot of great manufacturers and different equipment that’s available in the market, as well as new, emerging technologies," said Travis Smith of Ball Aerospace. "I’m learning a lot more about some of IPC’s standards and committees as well. It has been a fantastic week of educating ourselves for manufacturing processes going forward. And the IPC booth has a wealth of information."
Congratulations to Bhanu Sood! Dieter Bergman IPC Fellowship Award Recipient
Patty Goldman speaks with Dr. Bhanu Sood of NASA, Dieter Bergman IPC Fellowship Award recipient, about his extensive involvement with IPC on many committees developing standards to his work teaching professional development courses and mentoring young engineers.
IPC APEX EXPO 2020 Attendees Speak: Camille Sybert
"There’s a need for flexible solutions, so people are trying to make the most of the equipment that they buy, and they want to have the equipment that’s able to be flexible in scale with what it is that they’re looking for," said Camille Sybert of Nordson Electronics Solutions. "We have customers asking about future capabilities that they might not be ready for right now, but they want to know that it’s something that can be easily integrated into their processes in the future, as they’re in a position to better be able to do so."
Show & Tell Feature: New Developments and Opportunities
“Elevate the Excellence of Electronics” was the theme for this year’s IPC APEX EXPO. As expected, the show set the bar high with technical sessions, professional development sessions, committee meetings, numerous networking opportunities, and an exhibitor list that included all aspects of the electronics supply chain. Columnist Tara Dunn explains how she repeatedly found herself interested in multiple sessions being hosted at the same time, and having to pick and choose which session to attend.
IPC APEX EXPO 2020 Attendees Speak: Jered Stoehr
"What I like is the CFX and the Hermes standards and the little flags, showing IPC-CFX supporters," said Jered Stoehr. "It’s nice to see the data standards for how these machines are connecting and communicating."
Show & Tell Feature: Happy’s Highlights
Happy Holden traveled to San Diego for IPC APEX EXPO 2020. He was happy to get out of Grand Rapids, where the temperature had dropped to 28 degrees. In this article, he describes some of the highlights of the show, from beginning to end.
Institute of Circuit Technology Spring Seminar 2020
Back to Meriden, the nominal centre of England where the daffodils were blooming. A good crowd made it to the spring seminar that followed the Annual General Meeting of the Institute of Circuit Technology (ICT), with five specialist presentations and excellent opportunities to network with their peers in the industry. Pete Starkey shares his overview of the event.
I-Connect007 Researchers Survey Industry on COVID-19 Outbreak Effect
In the last 24 hours, we surveyed our readers regarding the coronavirus (COVID-19) outbreak and its effect on our industry. After reviewing the first 100 survey responses primarily from North America and Europe, one-third of the respondents reported that the outbreak was having at least a small effect on their orders. Two-thirds of our readers have yet to see any effect on their orders.
IPC APEX EXPO 2020 Attendees Speak: Gerry Padnos
"Overall, it has been a successful show for us," said Gerry Padnos. "We have mainly seen serious shoppers, not just window shoppers. We have done a lot of good work here, and we have a lot of interest in our products."
2020 EIPC Winter Conference, Day 2
Rested and refreshed, delegates returned to the conference room for the second day of the 2020 EIPC Winter Conference in Blijdorp, Rotterdam, South Holland. Pete Starkey provides an overview of the presentations and activities from Day 2.
2020 EIPC Winter Conference, Day 1
Pete Starkey recaps how the 2020 EIPC Winter Conference, held in mid-February, attracted around 90 delegates from a dozen European countries—as well as a few from North America—to an outstanding learning and networking experience for members of the PCB community. The theme of this year's event was: “The Needs for Next-Generation Electronic Devices and Changes in Fabrication Solutions for PCBs, PCBAs, Materials, and Technologies.”
Congratulations to Mike Carano! Dieter Bergman IPC Fellowship Award Recipient
Patty Goldman spoke with Mike Carano about being awarded the Dieter Bergman IPC Fellowship Award, what that means to him as someone who was inspired by Dieter, and after 40 years in the industry, what keeps him excited going forward. Talking with Mike, one can feel his enthusiasm for IPC and the industry, which is contagious.
Shaun Tibbals Discusses Electra’s Continued Growth
In this video interview from the show, Guest Editor Dick Crowe speaks with Shaun Tibbals, sales and marketing director at Electra, about inkjet printing as opposed to conventional approaches, such as curtain coating and/or screen printing. Benefits involve the economical use of materials and zero VOCs. Shaun also explains the company's approach to serving the PCB and semiconductor segments.
IPC APEX EXPO 2020 Attendees Speak: Tom Salmon
"I’m impressed by what I’ve seen and the variety of solutions. Industry 4.0 is still a big thing here," said Tom Salmon of SEMI. "I’m guessing just by the number of attendees that we took a little bit of a hit from the coronavirus. But most of the people I’ve talked to are happy with the meetings that they’re having with folks. Overall, it seems to be positive for everybody."
IPC APEX EXPO 2020 Attendees Speak: Scott Pohlmann
"As a salesman, my job is to make sure I stay on the cutting edge of technology," said Scott Pohlmann of Milwaukee Electronics. "When our customers ask for certain features that they need on their equipment or performance, I need to know what the state-of-the-art equipment, profiles, and procedures are out there.
Inspiring Next-Generation Engineers Through STEM
Through the STEM Student Outreach Program, IPC invites high school students to visit IPC APEX EXPO for a day. Last year, they had about 100 participating students, and this year, it doubled. The program is designed to introduce students to our industry at a younger age. During one event planned for them, the students had a chance to participate in a hands-on soldering track, creating wearable buttons to take home with them.
Joe Fjelstad Breaks Down His Occam Process
Joe Fjelstad recently met with the I-Connect007 Editorial Team to discuss the potential benefits of his Occam process for solderless assembly. This technique allows assembly of the PCB without the risks associated with traditional surface-mount processes, such as solder joint failure. Has the time come for the industry to embrace Occam?
XRF: An Essential Tool to Help PCB Manufacturers Meet IPC Specifications
One of the main challenges in PCB manufacturing is to create a stable, long-term coating of the copper surface to perform critical functions throughout the expected lifetime of the part. The surface coating is there to do two things: prevent the copper from oxidizing by coming in contact with the air and form a reliable contact for a soldered joint or wire-bonded connector.
IPC APEX EXPO 2020 Attendees Speak: Nili Walp
"We’re looking for customers with inspection issues, where they want to improve their current process, and a lot of them want something that’s more comfortable," said Nili Walp of Vision Engineering. "One guy said, 'I see my people on the floor, and their necks and backs hurt.' Our systems offer that eyepiece that’s an ergonomic solution; it’s about different methods of inspection."
NCAB: A ‘Hub’ That Works With Designers From Start to Finish
In this video interview from the show, Guest Editor Kelly Dack meets with Ruben Contreras, field applications engineer at NCAB Group, and Shaun Salas, key account manager. They discuss a variety of ways to overcome challenges with tariffs and broker relationships, as well as emphasizing upstream expertise and how the company operates as a "hub." Part of NCAB’s objective is to work with designers and design engineers to make the board more manufacturable.
Catching up With Midstate Electronics
Dan Beaulieu recently sat down with Susan Matteo, Joan Allen, and Gerri Wooten from Midstate Electronics’ sales team to discuss their company, how long they have been in business, the key ingredients to their longevity and success, and how they see the market today in general. Midstate offers everything from multilayer PCBs to flex and rigid-flex circuits and PCB assembly.
Burt Rutan’s Keynote: SpaceShipOne
In this video clip from his presentation, Burt Rutan discusses some of his aircraft’s revolutionary flights that drew the most public attention, including SpaceShipOne, which flew three of the five manned space flights launched by man in 2004. He also explains the benefits of working with Microsoft’s Paul Allen, who agreed to fund SpaceShipOne based on a simple handshake.
David Bergman: CFX a Key Ingredient of Smart Factories
In this video interview from the show, Jennie Hwang and David Bergman, IPC's VP of standards and training, address the use of CFX to facilitate plug-and-play smart factories. IPC APEX EXPO 2020 offered a variety of demonstrations of CFX, IPC’s Connected Factory Exchange.
Rogers Continues to Grow and Adapt
In this video interview from the show, Guest Editor Judy Warner and Tony Mattingly, senior product manager at Rogers Corporation, discuss the state of materials at the company, as well as the Rogers innovation centers the company has opened recently.
Insulectro: Educating Designers About High-Speed Materials
In this video interview from the show, Ken Parent, Insulectro's VP of sales and product manager, speaks with Guest Editor Kelly Dack about the company's efforts to educate engineers and designers about materials and their options and availability. Insulectro has held a series of PCB design classes and plans to keep educating designers about these high-speed materials.
Randy Cherry: IPC Validation Services Continues to Expand
In this video interview from the show, Randy Cherry, IPC's director of validation services, gives Guest Editor Judy Warner his annual update on IPC's Validation Services, which is growing along with ever-increasing IoT and connectivity.
Designing Hardware for IoT Security
Andy Shaughnessy and Happy Holden talk to John Watson about IOT device security, highlighting the types of attacks and points of entry that are conceivable in a wireless smart sensor filled world.
Stencils: Not As Simple As They Seem
Stephanie Hardin of Integrated Ideas and Technologies Inc. discusses her role in the supply chain as a stencil manufacturer, improvements she sees from micromachined step stencils, and why she believes trying to have standardized stencil layouts is wishful thinking due to the many fluctuating variables.
Ventec’s Materials are Enablers for 5G, Industry 4.0
In this video interview from the show, Technical Editor Pete Starkey and Ventec COO for Europe and the Americas Mark Goodwin discuss Ventec’s latest high-speed, low-loss, high-frequency materials as enablers for 5G and Industry 4.0.
CB Tech and Technica Tout Titan’s Traits
During the show, Technical Editor Pete Starkey met with Frank Medina, president and CEO of Technica USA, and Harry Kok, international sales director at CB Tech. They discuss the features of the CB Tech Titan direct imaging system, which has very high throughput capability with best-in-class registration consistently maintained from the beginning to the end of the batch. Kok also explains how the Titan fits in with CB Tech’s ongoing plans for Industry 4.0.
IPC APEX EXPO 2020 Attendees Speak: Lauren Byrge
"We design and fabricate group spaces for various clients on the show floor, so we’re just visiting clients and checking out what IPC APEX EXPO is offering this year," said Lauren Byrge, account executive for Marquis Exhibits. "I feel like the crowd is pretty good. Every booth looks like it’s buzzing. My impression of the electronics industry is good. The people are friendly and nice, and we enjoy working in this space."
IPC APEX EXPO 2020 Attendees Speak: Brian Wojtkiewicz
"It seems they are all pursuing digital imaging; whether it’s direct imaging exposure or inkjet solder mask, they’re all going that direction, and it’s not just the big customers; small customers are doing the same," said Taiyo's Brian Wojtkiewicz. "They’re investing money, which is good. New investment is what has been lacking for a couple of years."
Taiyo America Brings New Ideas to Solder Mask Development
During the show, Technical Editor Pete Starkey and Don Monn, Midwest regional sales director at Taiyo America, discuss the company’s progress with the establishment of inkjet solder mask as a production reality, now with OEM approvals. Monn also addresses the development of crack-resistant white solder mask and new screen-printable formulations with very high thermal conductivity.
The Success of IPC’s STEM Student Outreach Program
The IPC Education Foundation (IPCEF) hosted its STEM Student Outreach Event on February 6 at IPC APEX EXPO in San Diego. Nine local high schools attended bringing 193 students and 30 educators from Mission Hills High School, Morse High School, North County Trade Tech High School, Saint Marcos High School, E3 Civic High School, Point Loma High School, Otay Ranch High School, Mount Miguel High School, Otay Ranch High School—Girls in STEM. Twice as many students were able to participate this year, and each participating high school received a $1,000 grant and soldering station to enhance STEM-related learning at their school.
Meet Sharon Cohen, I-Connect007 Columnist
Meet Sharon Cohen, one of our newest I-Connect007 columnists! Sharon’s columns will share Orbotech’s expert knowledge on how to maximize the value of manufacturing systems. Mr. Sharon Cohen is the president of Orbotech West, where he is responsible for the PCB division’s organization in North America and EMEA (Europe, Middle East, and Africa).
Burkle North America: New Equipment and ‘New Blood’ in the Industry
During the show, Guest Editor Dick Crowe and Kurt Palmer, president and CEO of Burkle North America, discuss Kurt's career history and responsibilities in his present role. Palmer also details the equipment that the company is exhibiting on the show floor, and the palpable excitement that veteran technologists feel this year seeing younger engineers and students attending IPC APEX EXPO 2020. There’s a lot of “new blood” in the industry, as Palmer explains.
Max Seeley: Some Designers Hesitant to Adopt New Tech
I spoke with Max Seeley of 3M about a design class he presented at AltiumLive in Frankfurt, Germany. We also discussed autorouting and the continuing advances in EDA tools, as well as the schism between users who embrace new technology and those who still prefer to layout their boards the old-fashioned way. Which camp do you belong to?
IPC APEX EXPO 2020 Attendees Speak: Katie Carl
"We have a wide range of kids. All of them have some sort of interest in technology, which is why they wanted to come in general," said Katie Carl, a high school teacher escorting a group of kids at IPC APEX EXPO. "It’s neat when they start seeing how these technologies are created because a lot of them have seen robotics or have done a tiny bit of soldering with little circuits, but when they can see how those things are built and created in the industry, it makes it more applicable for them."
Congratulations to Steve Pudles! IPC Hall of Fame 2020 Inductee
With over 32 years spent working with IPC, Steve Pudles was elected to the IPC’s Hall of Fame this year. Patty Goldman spoke with Steve about how he first became involved as well as his time in the organization, including his work with the EMS Management Council.
Solder Paste Printing From the Stencil’s Perspective
Jeff Schake of ASM Assembly Systems discusses the complications surrounding printing and solder paste that he sees from his perspective as a stencil expert.
Will Moisture Management Expand to the U.S. Market?
Rich Heimsch, Super Dry director, chats with Nolan Johnson about the growing demand for moisture management in North America versus its earlier adoption in Europe, and how moisture management fits into Industry 4.0 and the smart factory.
IPC Government Relations: Focus on Supply Chain Resiliency
During IPC APEX EXPO, Editor Nolan Johnson sat down with Chris Mitchell, VP of global government affairs, to discuss IPC’s latest initiative with industry intelligence programs. As Chris explains, some of these efforts are focused on improving the DoD’s supply chain. This includes moving the DoD from leaded to lead-free components to help avoid millions of dollars in rework. He also discusses the team’s drive to unite with partners around the world and create a truly global organization.
Press Release Tips
Copyright © 2020 I-Connect007. All rights reserved.