-
- News
- Books
Featured Books
- pcb007 Magazine
Latest Issues
Current IssueThe Sustainability Issue
Sustainability is one of the most widely used terms in business today, especially for electronics and manufacturing but what does it mean to you? We explore the environmental, business, and economic impacts.
The Fabricator’s Guide to IPC APEX EXPO
This issue previews many of the important events taking place at this year's show and highlights some changes and opportunities. So, buckle up. We are counting down to IPC APEX EXPO 2024.
Getting to Know Your Designer
In this issue, we examine how fabs work with their design customers, educating them on the critical elements of fabrication needed to be successful, as well as the many tradeoffs involved. How well do you really know your customer? What makes for a closer, more synchronized working relationship?
- Articles
- Columns
Search Console
- Links
- Events
||| MENU - pcb007 Magazine
Benchmarking Your Process Engineering
April 29, 2021 | I-Connect007 Editorial TeamEstimated reading time: 4 minutes
Mark Thompson has been in bare board fabrication for over 30 years. He is now laying out printed circuit boards at Monsoon Solutions, a high-tech design bureau near Seattle, Washington. With Mark’s extensive hands-on knowledge of PCB manufacturing, he brings a unique perspective to PCB design.
In this discussion with the I-Connect007 editorial team, Mark shares what’s important from a process engineer’s point of view, and how to stay on top of evaluating and benchmarking your manufacturing process, along with insights from his new role as a designer.
Barry Matties: Mark, now that you’re a PCB designer, after decades in fabrication, what is the most surprising thing you’ve learned?
Mark Thompson: Oh, gosh, there are a number of them. For years I preached things like, “Don’t design at minimums due to etch compensations based on copper weights.” But now I find myself living that because I’m running out of space. I’m designing it 4/4 and then thinking, “Well, gosh, if I do that, now I’m going to have to etch compensate it on half-ounce copper, and it’s going to be four and a half and three and a half, which means they’re going to be relegated to three-eighth ounce copper foils.” And that might be a problem for power functions. It might be a problem for the part itself, and it may not live with that. So that’s one of the things I’ve learned.
I’ve also learned a lot about component placement and footprint design. We’ve talked about footprints before and how critical it is to get your footprints right. And truthfully, the footprints themselves are pretty much the same. What changes is the courtyard, the distance around the component that you’re actually putting on the board, and that distance is dictating how much space you have. There could be a tall part, and you might need to have a human, have a finger go inside there and actually reach in and hand solder something in on a very tall part. So that becomes an issue, and that’s one of the other things that I’ve learned.
In fact, it’s almost like I blanked out my 25 years at Prototron and 30+ years in PCB manufacturing when I started designing. I have to completely rethink the game and deal with a whole lot more variables. Designing is certainly not point-to-point connecting the nets. It is so much more than that. It’s understanding those nets; it’s understanding power. What’s the very first thing I look at when I’m looking at a board? I’m looking at power functions. I ask questions about mechanicals. When we do a kickoff call with a customer, the very first thing I say is, “What sort of mechanical considerations do you have?”
In conjunction with that, there are also power functions. If they have considerations for high-current power, then I’ve got to make sure that the trace width is going to be large enough. I’ll use a site like Saturn and I’ll pre-calculate how wide that trace needs to be, and then I’ll be able to preplan things. In fact, that’s one of the things that I’ve learned here recently, very intimately: When I’m placing parts, I allow myself enough space to drop vias to be able to do interconnects. Because if it’s a six-layer board and I don’t have very much room on the outer layers based on the part geometries and the available space, I’m going to have to drop down to an internal layer. And by doing that, it means I’m going to have to have a via. I have to account for that via width and that pad size associated with that via all the way down through the stack. I’m also dealing with pouring polygons. That’s a big one.
Matties: Right. Is there anything that you used to preach out there that you would now say, “Hold it, I’ve rethought this now that I’m on this end, and let’s do it this way?”
Thompson: I’ll give you an example of that. As a manufacturer, you want things looking nice and clean. If they’ve got metal at the edge, you’re going to try to clip it back. Where do you not clip it back? You don’t clip it back on an RF launch, a coplanar waveguide type structure that goes right to the edge of the board and needs to go right to the Z-axis edge of that particular board, and it has to stay that way.
Matties: That’s interesting. Thank you for sharing that. With your fabrication background, you’re in a really unique position as a PCB designer.
Thompson: I am. I can’t tell you how many conversations I’ve had with the designers here at Monsoon about fabrication-related issues. Frequently they’ll ask me what the minimum hole size with a particular pad size is. And they’re very simple questions, but they’re very helpful if you don’t know the answer.
To read this entire interview, which appeared in the April 2021 issue of PCB007 Magazine, click here.
Suggested Items
Indium Corporation, Industry Partners to Showcase Products “Live@APEX”
03/26/2024 | Indium CorporationIndium Corporation®, in cooperation with its industry partners, will feature its proven solder solutions live on the show floor throughout IPC APEX Expo from Apr. 9‒11 in Anaheim, Calif., U.S.
ITW EAE Wins New Product Introduction Award for Electrovert® Wave Soldering Machine Deep Wave
03/26/2024 | ITW EAEITW EAE is proud to announce that it has earned a 2024 New Product Introduction (NPI) Award for Electrovert’s Deep Wave option for wave soldering machines. This new, innovative system provides the ability to pump up to a 20 mm wave height.
Mek's Next-Gen AOI Technology Takes Center Stage at IPC APEX EXPO 2024
03/19/2024 | MEKMek is excited to announce its presence at IPC APEX EXPO, North America's largest electronics manufacturing event, in Anaheim, California, from April 6-11, 2024. Attendees are invited to visit Mek at booth #1433 to explore the latest AOI technology offerings.
Nihon Superior Sets New Standards in Lead-Free Soldering Technology at APEX 2024
03/13/2024 | PVANihon Superior Co. Ltd., an advanced joining material supplier, will exhibit in Booth 1325 during the 2024 IPC APEX EXPO, scheduled to take place April 9-11, 2024 at the Anaheim Convention Center in California.
Apollo Seiko Presents the Next Frontier in Non-Contact Soldering at 2024 IPC APEX EXPO
03/12/2024 | Apollo SeikoApollo Seiko, a leading innovator in soldering technology, is pleased to announce plans to showcase its latest advancements at Booth 1408 during the 2024 IPC APEX EXPO, taking place April 9-11, 2024 at the Anaheim Convention Center in California.