-
- News
- Books
Featured Books
- design007 Magazine
Latest Issues
Current IssueLevel Up Your Design Skills
This month, our contributors discuss the PCB design classes available at IPC APEX EXPO 2024. As they explain, these courses cover everything from the basics of design through avoiding over-constraining high-speed boards, and so much more!
Opportunities and Challenges
In this issue, our expert contributors discuss the many opportunities and challenges in the PCB design community, and what can be done to grow the numbers of PCB designers—and design instructors.
Embedded Design Techniques
Our expert contributors provide the knowledge this month that designers need to be aware of to make intelligent, educated decisions about embedded design. Many design and manufacturing hurdles can trip up designers who are new to this technology.
- Articles
- Columns
Search Console
- Links
- Events
||| MENU - design007 Magazine
Advances in Medical Diagnostics Using LoC and LoPCB Technologies
March 31, 2020 | Pete Starkey and Happy Holden, I-Connect007Estimated reading time: 14 minutes
Basic Components of an LoC
The component devices that make up an LoC are (Figure 3):
- Electrophoresis: Separation columns
- Microfluidics: Channels, valves-pumps & mixers
- Chem-bio detectors and sensors
- Microfluidic chips
Figure 3: LoC elements [1].
1. Electrophoresis
This is a method of separating large molecules (i.e., DNA fragments, blood, or other proteins) from a mixture of similar molecules by passing an electric field toward an electric pole (anode or cathode) in a liquid on various media (e.g., paper, glass, gel, liquid). It is used to separate and purify biomolecules. Each molecule travels through the medium at a different rate—depending on its electrical charge and size—and toward either the anode or the cathode at a characteristic speed (Figure 4).
2. Microfluidics
This custom application of fluidic technology is applied with conventional micromachining techniques, such as wet etching; dry etching; deep, reactive ion etching; sputtering; anodic bonding; and fusion bonding to make flow channels, flow sensors, chemical detectors, separation capillaries, mixers, filters, pumps and valves for various LoCs (Figure 4).
Flow in microchannels is laminar, which allows selective treatment of cells in microchannels, or arrays, as well as biochemical reactions. The integration of microelectronics, micromechanical, and microoptics onto the same substrates allows automated device control, which reduces human error and operation costs.
3. Chem-Bio Detectors and Sensors
Detectors, sensors, and electrodes can be ChemFET and BioFET C-MOS devices with special membranes or diffusions to make them sensitive to chemical or biological molecules. The sensors and electrodes are electrical elements that are sensitive to various chemical or biological molecules, plated with gold, silver, platinum, palladium, etc., and their salts (Figure 5).
4. Microfluidic Chips
A microfluidic chip is a set of microchannels etched or molded into a material (glass, silicon, or polymer, such as PDMS). Microchannels form the microfluidic chip connected in order to achieve the desired features (mix, pump, sort, control bio-chemical environment, etc.). Networks of microchannels are connected to the outside by inputs (inlets) and outputs (outlets) pierced through the chip (interface between the macro and micro world).
Page 2 of 5
Suggested Items
Taiyo Circuit Automation Installs New DP3500 into Fuba Printed Circuits, Tunisia
04/25/2024 | Taiyo Circuit AutomationTaiyo Circuit Automation is proud to be partnered with Fuba Printed Circuits, Tunisia part of the OneTech Group of companies, a leading printed circuit board manufacturer based out of Bizerte, Tunisia, on their first installation of Taiyo Circuit Automation DP3500 coater.
Vicor Power Orders Hentec Industries/RPS Automation Pulsar Solderability Testing System
04/24/2024 | Hentec Industries/RPS AutomationHentec Industries/RPS Automation, a leading manufacturer of selective soldering, lead tinning and solderability test equipment, is pleased to announce that Vicor Power has finalized the purchase of a Pulsar solderability testing system.
AIM Solder’s Dillon Zhu to Present on Ultraminiature Soldering at SMTA China East
04/22/2024 | AIMAIM Solder, a leading global manufacturer of solder assembly materials for the electronics industry, is pleased to announce that Dillon Zhu will present on the topic: Ultraminiature Soldering: Techniques, Technologies, and Standards at SMTA China East. This event is being held at the Shanghai World Expo Exhibition & Convention Center from April 24-25.
AIM to Highlight NC259FPA Ultrafine No Clean Solder Paste at SMTA Wisconsin Expo & Tech Forum
04/18/2024 | AIMAIM Solder, a leading global manufacturer of solder assembly materials for the electronics industry, is pleased to announce its participation in the upcoming SMTA Wisconsin Expo & Tech Forum taking place on May 7 at the Four Points by Sheraton | Milwaukee Airport, in Milwaukee, Wisconsin.
Hentec/RPS Publishes an Essential Guide to Selective Soldering Processing Tech Paper
04/17/2024 | Hentec Industries/RPS AutomationHentec Industries/RPS Automation, a leading manufacturer of selective soldering, lead tinning and solderability test equipment, announces that it has published a technical paper describing the critical process parameters that need to be optimized to ensure optimal results and guarantee the utmost in end-product quality.